KME 5x Replacement Diamond Lapping Films - Choose from 0.1, 0.5, 1, 3, 6, 9 Microns


This variant is currently sold out

Please fill in the form below if you'd like to be notified when it becomes available.

This accessory is to be used with the KME Knife Sharpening Systems.

These are replacement films are to be mounted on a Tempered Glass Blank.

KME diamond lapping films are an economical way to achieve true mirror polishes on your bevels or to just take your blades sharpness to the next level.

Choose from:

  • 9 micron - 1,800 grit
  • 6 micron - 3,000 grit
  • 3 micron - 6,000 grit
  • 1 micron - 16,000 grit
  • 0.5 micron - 60,000 grit
  • 0.1 micron - 160,000 grit

Each grit size comes with 5 strips of lapping film.

Instructions: We strongly advise working with only one film grit and glass blank at a time because the colors of some grits are very similar and can be easily confused. 1) Remove plastic from back of the strip to expose adhesive. 2) Secure strip to the glass blank. Be careful to align the strip fairly straight on the glass blank. Before use, the strip can be removed and repositioned if necessary. Use a hair dryer briefly to loosen the adhesive prior to removing a worn strip.

Use only downward, away from the edge strokes just like stropping. Upward, into the edge strokes can cut the films.

Use Zero muscle pressure. Literally, just the weight of the stone holder and glass blank. Each self-adhesive strip will service about 5-7 knives but we’ve gotten over 10 blades by going very lightly with them. Adding pressure will significantly shorten the service life of each strip though.

We’ve found that a lightweight oil is hands down, the best lubricant to use on these diamond films. You can even use vegetable oil if you like. We offer a small dropper bottle of honing oil that is perfect for use with them.

Made in USA.

Similar Products